Our doors are always internally glazed to increase security, ensuring there is no access to the beads from outside the property.

Our fitters can take the job from design to completion; they can make the hole for the doors and ensure the doors are fitted to current building and Fensa regulations so we always recommend using our fitters to ensure quality and long life. However the doors come complete with a fitting instruction manual, so DIY installation is possible, however if you are unsure of the term ‘toe and heeled’ we highly recommend allowing our fitters to install your doors.

The doors can open in or out, stack either side and open in various configurations to suit your requirements.

Apart from a better looking, smoother operating, and a more reliable door system, the more durable Aluminium frame is extremely secure, and is thermally broken giving high performance European weather ratings. UPVC folding doors are less secure, prone to failure such as jamming especially on larger doors and offer no weather ratings.

The low threshold is most commonly used for wheel chair access, or to partition rooms between conservatories and houses. The low threshold can be sunk into the floor so it is totally flush, it is ideal for a folding door leading out onto decking or a patio. The standard outer frame has a superior weather rating, ratings that are the best any folding door system has to offer. The polyamide thermal break offers superior installation.

For ease of care and enhanced enjoyment of our bi-fold doors they come glazed with Pilkington Active (self cleaning) glass. The units are argon as standard filled for better thermal properties. The units are 28mm thick, however we offer glazing options ranging from 6mm to 38mm depending on your needs.

Very, as well as being internally glazed, the traffic doors operate with a triple lock shoot bolt system, securing both the top and the bottom of the door.

No, the doors are basically maintenance free.

Our brand new state of the art factory is always well stocked and ready to produce. When we receive an order our sales team rapidly process it and hand over to our production manager. Production is started same day, we control the whole process, so we turnaround our doors quicker than any other company in the UK. Our prices are competitive because there is no middleman placing his/her mark-up on the end product. You are dealing with the company that manufacture the doors the trade buys. Other companies would charge extra for a premium express service, our fast turn around time comes as standard with every door ordered.

We always recommend using our fitters to ensure a quality installation, If you would like to train up a team of fitters then on your first order we recommend you use our fitters then they can show your fitters how to install the doors properly to for future orders.

The manufacturing sizes limit at 6.5 metres wide and 2500 high.

The height of the DV10 is 63mm and the depth is 78mm.

The height of the DV10 is 63mm and the depth is 78mm.

We offer a 150mm and a 190mm cill, both cills are 25mm high.

We have an 80kg weight limit on each panel to ensure smooth operation of the door, therefore we recommend a maximum width of 1000mm per panel. We also recommend minimum width of 700mm, any smaller than this width the gaskets rub together and the door will not run as smoothly as it should.

Air transmission:  PA2   Mechanical resistance to wind:  PV2   Watertightness:   PE2   Air transmission: PA2   Mechanical resistance to wind: PV2   Watertightness:    PE2

Built in depth: outer frame 78mm, sash 70mm
Sealings: with extruded E.P.D.M. rubbers and PP brushes.
Glazing: from 6 to 38mm